V540
From Moto4Lin
The V540 is basically the same as the V551, but without the camera.
[edit]
Gentoo 2.6 kernel
- Compile the cdc-acm module (In 2.6.18: Device Drivers | USB Support | USB Modem (CDC ACM) support )
- Load the module
- Edit the preferences in moto4lin to use "/dev/ttyACM0" as the device
- Run the following from a commandline:
echo AT+MODE=8 > /dev/ttyACM0
- Hit "Connect" in Moto4Lin
I was able to seem edit and copy files without any problems. Backing up all seems caused some errors.
